Features:

1)Input protections:

Polarity reverse / Over and under voltage / Low battery Alarm and shut down

2)Output protections:

Short circuit / Overload / Over temperature

3)With power ON/OFF switch and LED indicator

4)Input and output fully isolation

5)Low power consumption(standby)

6)LVD meet EN60950 and E8 mark

7)EMC meet EN61000-6-1-3, EN55022

Specifications:

1) Max. Continuous output power: 1800W

2) Max. Continuous output power 2H.: 1900W

3) Surge capability peak output power: 3600W

4) DC input static current (no load): ¡Ü1.8AMP

5) AC output wave form: Modified Sine wave

6) Normal input voltage range: 11-15V / 21~30V

7) High voltage cut off level: >15V / 30V

8) Low voltage alarm: 10.6V(DC12V) / 20.5V(DC24V)

9) Low voltage cut off level: 9.5V(DC12V) / 19.5V(DC24V)

10) Output AC voltage: AC 115V RMS / AC 230V RMS

11) Output frequency level: 60HZ / 50HZ

12) Overload power range: 1800W, 5-30%

13) Hi-pot test: PRI/sec, 1500V/AC 5mA/60s

14) Temperature protection: <65

15) Full load max. Optimum efficiency: ¡Ý90%

16) AC output short circuit protection: System shut down (no damage)

17) Fan run: Inner temperature rising up is ¡Ý40


18) Fault warning: Alarm beep

19) LED indicator:

A) Normal: Green

B) Fault: Red green

20) Fuse (spade type): 40Ax 6pcs

21) Dimensions (L x W x H): 320x 176 x 77mm

22) Environmental condition:

A) Operating temperature: -5~45

B) Operating relative humidity: 10-90% RH

C) Storage temperature: -10~50

D) Storage relative humidity: 10-95% RH

(inverter, power inverter, dc to ac power inverter, solar power inverter)