| P-series Four Channel Power Amplifier (CE and RoHS) |
| ITEM | P900 | P1200 | P1800 |
| Output Power | Continuous Average Power RMS, 1Khz, 1.0% HTD+N |
| 8ΩStereo Power(RMS) | 225W X 4 | 325W X 4 | 450W X 4 |
| 4ΩStereo Power(RMS) | 350W X 4 | 490W X 4 | 675W X 4 |
| 2ΩStereo Power(RMS) | | | |
| 8ΩBridged Power(RMS) | 750W X 2 | 900W X 2 | 1100W X 2 |
| 4ΩBridged Power(RMS) | | | |
| Frequency Response(+o/-0.3dB,1W/8Ω) | 20Hz-20kHz,-3dB@135kHz |
| Power Bandwidth+0.5dB | 10-42K | 10-40K | 11-31K |
| Power Bandwidth (1 Watt-3dB) | 10-70K | 10-70K | 10-43K |
| TourClass Protection | ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input |
| THD+N (1kHz 1W ) | ≤0.03% |
| Crosstalk ("A"weighted, full power@4Ω) | ≥ 70dB |
| Slew Rate(45V/us) | 30 | 20 | 30 |
| Input Connectors (per channel) | Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) |
| Output Connectors (per channel) | 5-way binding posts or Speakon connectors (market dependent) |
| Damping Factor (20Hz-1kHz) | 250 | 230 | 248 |
| Voltage Gain(dB) | 35 | 35 | 40 |
| Input Sensitivity (rated power at 8Ω) | 1.1 | 1.3 | 1.6 |
| Class | AB | AB | H |
| Signal-to-Noise Ratio | 100 | 100 | 96.8 |
| Power Supply (factory configured) | AC220V/230V,50-60Hz |
| Cooling | Two side panel variable speed DC fans, better than conventional cooling |
| Controls | Front panel: 2 attenuators, power switch; Rear panel: signal ground lift & mode switches. |
| LED Indicators (per channel) | Signal, Protect, Active, Critical |
| Required AC Mains (220V-50Hz) Stereo@4ohm(rated power) | 6.6A | 8.5A | 16.5A |
| Dimensions (W×H×D) | 480×88×495 | 480×133×495 |
| Net Weight | 18.5 | 24.5 | 31.5 |
| Gross Weight | 21.5 | 28 | 35 |
P-Series Four Channal Power Amplifier (CE and RoHS )
