Inquiry Basket (
Mechanical ComponentsAny of various devices that regulate the flow of gases, liquids, or loose materials through piping or through apertures by opening, closing, or obstructing ports or passageways.
Sculpture produced by molding.
Forming metal objects by injecting molten metal under pressure into dies or molds.
An operation that changes the shape, surface finish, or mechanical properties of a material by the application of special tools and equipment.
The component in a pipeline that reduces the pipe size from a larger to a smaller bore.
A plastic container into which liquid is injected to create a given shape when it hardens.
A digital thermometer is a thermometer used for medical reasons, to check a person's body temperature. It can be put under the arm or in the mouth.
A preformed mould/mold.
Ball Valve with flanged end.
A butterfly valve approved with API certificate.
Something, such as a machine or an engine, that produces or imparts motion.
A machine that converts energy into mechanical force or motion.
The chamber in which a piston of a reciprocating engine moves.
A metal pin with incised threads and a broad slotted head that can be driven as a fastener by turning with a screwdriver.
Any of several material-forming tools.
A toothed machine part, such as a wheel or cylinder, that meshes with another toothed part to transmit motion or to change speed or direction.
A device that supports, guides, and reduces the friction of motion between fixed and moving machine parts.
A hollow form or matrix for shaping a fluid or plastic substance.
The long narrow stem or body of a spear or arrow.
An elastic device, such as a coil of wire, that regains its original shape after being compressed or extended.
Steel whose characteristics are determined by the amount of carbon it contains.
Stamping is a metalworking process by which sheet metal strips are punched using a press tool which is loaded on a machine press or stamping press to form the sheet into a desired shape.
A valve that opens by turning a handle attached to a ball inside the valve. The ball has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle position lets you "see" the valve's position.
A protruding rim, edge, rib, or collar, as on a wheel or a pipe shaft, used to strengthen an object, hold it in place, or attach it to another object.
An object or material produced by extruding.
An indehiscent, hard-shelled, one-loculated, one-seeded fruit, such as an acorn or hazelnut.
The surface at which two or more mechanical or structural components are united.
A case into which an object or device fits.
A device that converts any form of energy into mechanical energy, especially an internal-combustion engine or an arrangement of coils and magnets that converts electric current into mechanical power.
A valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid.
Electronics Transfer of energy from one circuit to another.
Any of various devices used to join, grip, support, or compress mechanical or structural parts.
An internal-combustion engine that uses the heat of highly compressed air to ignite a spray of fuel introduced after the start of the compression stroke.
Sculpture produced by molding.
A projecting part with an opening, as at the end of a hose, for regulating and directing a flow of fluid.
Something forged; a piece of forged work in metal.
Restraint that attaches to something or holds something in place.
A valve composed of two semicircular plates hinged on a common spindle, used to permit flow in one direction only.
-
A 4 point contact ball bearingA ball bearing is a common type of rolling-element bearing, a kind of bearing.
A small detachable part for a machine or apparatus which made of Brass.
The system of gears and/or the hydraulic system.
A valve made of steel metal or alloy.
A material used to produce abrasion.
A valve actuated by a solenoid, for controlling the flow of gases or liquids in pipes.
Gasoline Engine is an internal combustion engine with spark-ignition designed to run on petrol (gasoline) and similar volatile fuels.
A direct current motor that converts electricity to mechanical work.
Any of a wide variety of seals or packings used between matched machine parts or around pipe joints to prevent the escape of a gas or fluid.
-
A manually operated valve with its outlet opening oriented at right angles to its inlet opening; used for regulating the flow of a fluid in a pipe.
A connector between two moving parts to relay the motion, such as a Universal joint or an Oldham coupler.
The valves are made of stainless steel.
Control valves are valves used within industrial plants and elsewhere to control operating conditions such as temperature, pressure, flow, and liquid level by fully or partially opening or closing in response to signals received from controllers that compare a "setpoint" to a "process variable" whose value is provided by sensors that monitor changes in such conditions.
Stamping is a metalworking process by which sheet metal strips are punched using a press tool which is loaded on a machine press or stamping press to form the sheet into a desired shape.
The center part of a wheel.
A flexible tube for carrying fluid.
NBR:nitrile -butadiene rubber.
The act or process of making casts or molds.
A shell and tube heat exchanger installed in thermal power stations.
The seal is made of rubber.
An API approved valve.
A diamond blade is a circular saw blade used for cutting hard or abrasive materials.
An oil pump is a pump designed to supply pressurised oil to a closed system.
Any of various machines in which the kinetic energy of a moving fluid is converted to mechanical power by the impulse or reaction of the fluid with a series of buckets, paddles, or blades arrayed about the circumference of a wheel or cylinder.
A motor combined with a set of speed-reducing gears.
A bearing using rollers to reduce friction between machine parts.
A heavy object attached to a vessel by a cable or rope and cast overboard to keep the vessel in place either by its weight or by its flukes, which grip the bottom.
Sanitary valves are designed for applications requiring clean or sterile processing.It predominantly used in the pharmaceutical industry.
-
The casting is made of steel.
The chamber in which a piston of a reciprocating engine moves.
One that strains, as a device used to separate liquids from solids.
The ball valve is made of stainless steel.
-
-
Moulds of automotive/cars parts or components.
A joint in a rigid rod that allows the rod to 'bend' in any direction.
Any machine, piping or tubing part made of copper that can attach or connect two or more larger parts.
A removable metal plate over a machine part, such as a valve.
A kind of ball valve made of steel.
A small knob, nail head, or rivet fixed in and slightly projecting from a surface.
An exhaust valve, held shut by rubber springs, used to discharge gas from the extreme top of a balloon.
Any of various toothlike projections arranged on a wheel rim to engage the links of a chain.
A metal casting of accurately reproducible dimensions.
Drill bits are cutting tools used to create cylindrical holes.
The pipe is pliable;capable of being bent or flexed.
Valves with cylindrical or conically-tapered "plugs" which can be rotated inside the valve body to control flow through the valve.
Related Trade Shows
|
